Skip to main content

Asia Pacific, China Presents Current Chief Consumer for Industrial DeNOx systems and services By 2024

Fossil fuel combustion done for various applications including waste incineration, power generation and industrial furnaces, boilers or kilns leads to emission of harmful NOx gases. At regional and country level there are certain legislations on the emission of such harmful gases in order to curb air pollution. According to these legislations, emission limits have been set for various industries and utilities. This has made the installation and use of a DeNOx service and system mandatory for many industries.
DeNOx systems and services are generally installed in areas such as coal-fired power plants, gas turbines, natural gas-fired power plants, biomass plants, and in industries such as metal processing units and cement plants. Industries prefer selective non-catalytic reduction (SNCR) over selective catalytic reduction (SCR) in order to save on to the huge initial operation, capital and maintenance cost whereas coal-fired power plants usually install selective catalytic reduction systems for enhanced efficiency.
Global Industrial DeNOx Systems and Services Market: Drivers and Restraints
Stringent emission control regulations, industrialization amidst rigorous regulations in Eastern Europe and China and world's dependence on natural gas and coal for power generation are the major factors driving the industrial DeNOx systems and service market. Although, there are some factors which restrict the market’s growth such as unfavorable economic conditions and emergence of low-emission alternatives. Even after such restraints the market is expected to grow at a steady rate. Regulations of India and the United Kingdom are expected to favor the market and act as an opportunity for the industrial DeNOx systems and service market.
Global Industrial DeNOx Systems and Services Market: Geographical Dynamics
Industrial DeNOx systems and services for the European market are affected by the investment scenario in segments such as oil refineries capacity expansion, power generation, metal processing units and recent economic crisis. However, in the past few years the Eastern Europe market has performed well. This is primarily owing to the entrance of most countries in this region into the European Union (EU). In 2004 and 2007 EU enlargement accommodated these countries, which now have to abide by the regulations legislated by the EU commission on NOx emission. In addition, there was a major amount of installation done in the United States, amidst strict rules by the United States EPA. The major share of DeNOx systems and services market is held by the Asia-Pacific region. Presently, China is the chief consumer of DeNOx systems and services.
Fill the form for an exclusive sample of this report @ http://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=12368
The industrial DeNOx systems and services market is segmented on the basis of type into non-catalytic reduction (SNCR) and selective catalytic reduction (SCR). In addition, the classification of the industrial DeNOx systems and services market is done on the basis of types of technology employed in treating fuel gas in order to reduce NOx gases to essential water and nitrogen. Furthermore, the market is segmented on the basis of applications into utilities and industries.
The key market players are Alstom SA, Babcock Noell GmbH, Babcock & Wilcox Company, China Environment, Burns & McDonnell, FLSmidth & CO, Doosan Power Systems, Haldor Topsøe, Fuel Tech and Mitsubishi Heavy Industries among others. The report offers a comprehensive evaluation of the market. It does so via in-depth qualitative insights, historical data, and verifiable projections about market size. The projections featured in the report have been derived using proven research methodologies and assumptions. By doing so, the research report serves as a repository of analysis and information for every facet of the market, including but not limited to: Regional markets, technology, types, and applications.
Labels:
Location: Albany, NY 12207, USA

Comments

Post a Comment

Popular posts from this blog

Superabrasives (Turning, Cutting, Buffing, Drilling, Boring, Grinding) Market Research Report 2025

An abrasive is a material which molds or provides finishing to a work piece through a process which includes buffing, grinding, cutting, as well as polishing. Abrasion typically depends on the difference in the hardness of the material and the abrasive (with the latter being the harder of the two). Unlike regular abrasion where any two solid materials that repeatedly rub against each other tend to wear away, superabrasives possess the kind of hardness that enables them to stay usable for a longer period of time. On the basis of hardness, the top two superabrasives include diamond and cubic boron nitride (CBN). Industrial diamonds used as superabrasives are exceptionally hard materials. However, they display several technological limitations. For instance, when a diamond comes in contact with a ferrous alloy such as steel or a nickel superalloy, the resulting formation of carbide leads to its abrasion. Also, a diamond-containing tool can only be used at moderate temperatures a...
Post a Comment
Read more

Industrial Lubricants Market: Strong Demand Across Automotive Industry, Trends To 2025

Lubricants refer to the organic or inorganic material primarily being use to decrease friction between two surfaces in contact. Lubricants play a key role in several industries as well as in commercial and residential sectors. One of their most common uses is in the lubrication of bearings and gears, allowing for their easy movement at high speeds, without loss in energy, prevent excessive generation of heat, or most importantly, prevent damage that would be caused otherwise. Industrial lubricants are, therefore, essential in enhancing the overall efficiency of a machine that contains moving parts in contact with one another. The global industrial lubricants market is currently expanding at a solid growth rate, driven by several factors and spearheaded by the likes of BP, Total, Chevron Corporation, ExxonMobil, and Shell. Browse Market Research Report @  http://www.transparencymarketresearch.com/industrial-lubricants-market.html What Impact has the Oil and Gas Industry ...
Post a Comment
Read more

Rapid Prototyping Market - Rapidly Gaining Importance in Aerospace Sector, Research By 2024

Rapid prototyping is a technique in which the physical modeling of a design is done with the help of specialized machining technology. It was developed initially in the mid-1980s, the principle used in this technology is of solid modeling with the help of computer programs (i.e. CAD). Solid modeling makes use of computer aided-design (CAD) data to completely describe not just the external shape of parts or equipment, but its interior volume as well as the outside surfaces. The computer model is sliced into thin layers and the part of the product or commodity to be modelled or developed as per the requirement, is eventually fabricated by adding layers onto each other. Obtain Report Details @   http://www.transparencymarketresearch.com/rapid-prototyping-market.html The primary benefit of the system is that almost any shape can be manufactured using computerized programs. Time and money savings vary from 50% to 90% compared to conventional systems. Types of rapid proto...
Post a Comment
Read more